See View 3D Imaging Sonar Model 3264 Specification

The See-View 3D Sonar is based on Marine Electronics digital range of electronically scanning multibeam sonar’s utilising an improved wide band technique. The sonar scans a horizontal sector of 90° to a 1.5° resolution and a vertical sector of 20° to a 1° resolution simultaneously for every “ping” of the transmitter. The transmit beams can be dynamically steered for optimum performance.

The See-View provides a true 3D forward looking image updating at a rate dictated by just the travel time for one acoustic pulse. The system consists of separate transmitter and receiver arrays in a “T” configuration and cabled to an Electronics Processing Unit.

An optional motion reference unit to stabilise movement can be connected to the PC. The sonar data is transferred via an Ethernet link from the EPU to the host PC where the system is controlled.

The system software integrates the data from the sonar and MRU to display a 3D representation of the targets detected.

Optional GPS input and chart overlays can be added for harbour surveillance. Custom housings are available to meet with customer requirements.

Transducer Array

Operating Frequency:

Material:

Transmitter Beamwidth
Vertical:
Horizontal:

Receiver Beamwidth
Vertical:
Horizontal:

Number of Beams
Transmitter
Receiver

Operating Range:


Transmitter Dimensions:
Receiver Dimensions:

150Khz, wide Band

Aluminium, Polyurethane


1 °
90°


20°
1.5°


32
64

Min 20m
Max 500m

540 x 190 x 115mm
380 x 190 x 115mm

19 Inch rack 8u high

25Kg

0 to +40 degrees C
-10 to +60 degrees C


IP40

Fused and Filtered IEC mains inlet
2 x RS232 ports
RJ45/MT-RJ Ethernet
Transmitter Array
Receiver Array

240V AC at 2.5kW peak

Copyright © 2016. Marine Electronics Ltd.